Specific to bond plastic laminates on wood, chip
board, metals, concrete. To be spread by brush
or spatula.
• special for plastic laminates chip board,
metals
• fast and strong bond
• convenient open time
• resists up to 80°C

Features
Techniques Straw yellow color
Specific weight (UNI EN 542) 0.84-0.86 g / cm3
Solid residue in weight (UNI EN 827) 22-24%
Viscosity (20 ° C) (UNI 9056) 2500 mPa * s
Operating temperatures max 80 ° C
Open time (23 ° C, 55% HR) 30-40 min.
Yield (depending on surface absorption) approx. 200 g / m2
Application To achieve maximum adhesion performance, the surfaces involved
they must be dry and clean; in particular to remove grease or grease is possible
use degreasing solvents.
Apply a thin layer of product on the two surfaces to be glued and wait
evaporation of solvents (10-20 min., depending on temperature).
Then join the two surfaces and, if possible, press evenly to the maximum
pressure compatible with the mechanical resistance of the materials.
During use, ventilate the rooms and, where possible, operate under a hood
suction.