Products ››

POWER TOOLS

 ››

TOOL ACCESSORIES

 ››

WELDING ELECTRODES

 ››

SUPERCITO Basic type

Close Added to your cart

: __itemQuantity__
 items in your cart
TOTAL:
WELDING ELECTRODES OERLIKON SUPERCITO 2.5

WELDING ELECTRODES OERLIKON SUPERCITO 2.5

Code: 03-070006
Brand: ΕΡΛΙΚΟΝ

0.00 €

Add to Cart
Add to Cart
Close Added to your wish list

Supercito

Basic type, with iron powder

A reliable general purpose basic electrode with tough crack resistant weld metal
AWS: SFA-5.1 : Ε 7018
DIN: 1913 : Ε 5155 Β 10
EN: -
ISO: 2560 : Ε 51 5 Β 11020 (Η)

Basic type electrode with 115% recovery. Suitable for highly crack-resistant and tough joints, including Thomas grade and carbon steels up to 0.4% C. Good all-positional wel¬ding characteristics; ready deslagging.

Materials of application
Non-alloyed structural steels St 33, St 34, St 37, St 42, St 46, St 52.3, St 50-2*, St 60-2*, St70-2*.
Fine grained structural steels St Ε 255 (St Ε 26), St Ε 285 (St Ε 29), St Ε 315 (St Ε 32),St E3 55 (St E 36), W St E 255 (W St 28), W St E 285 (W St En 29), W St E 315 (W St E 32), W St Ε 355 (W St Ε 36) W St E 255 (TT St Ε 29), Τ St Ε 315 (ΤΤ St Ε 32), Τ St Ε 355 (ΤΤ St Ε 36).
Boiler plates Η Ι, Η II, A St 35, A St 41, A St 45, 17Μn4,19Μn5*.
Tube Steels St 35, St 35.4, St 35.8, St 45, St 45.4, St 45.8, St 55*, St 55.4*, St 52, St52.4, St Ε 210.7 (St 34.7), St Ε 240.7 (St 38.7) St Ε 290.7 (St 43.7), St Ε 320.7 (St 47.7), St Ε 360.7 (St 53.7).
Shipbuilding steels Α, Β, D, Ε.
Cast steels GS-38, GS-45, GS-52.
* Preheat to 150-300°C depending on plate thickness.

Weld metal 
C Mn Si S P
0.06 1.10 0.50 <0.02 <0.02



Mechanical properties of all-weld metal
Tensile strength (N/mm2) Yield strength (N/mm2) Elongation (L=5d) (%) Impact strength Charpy – V (+ 20°C) (Joule)
510-610 >380 >24 >150
Temperature (οC) + 20 0 - 20 - 40
Charpy-V (Joule) >150 >130 >80 >60



Welding current (type & amperage): D.C. pole (+)
Φ 2.0/300 Φ 2.5/350 Φ 3.25/450 Φ 4.0/450 Φ 5.0/450
40-60 60-90 90-140 140-190 190-250



Welding Positions: Horizontal, vertical-up, overhead.

My welding machine shuts down every few minutes during operation. Is there something wrong with it?
Depending on their specification, welding machines may operate continuously for a few minutes for a given amperage output. After that, due to overheating of their components, they automatically shut down in order to protect them from permanent damage.

What is Duty Cycle?
Duty cycle, usually denoted as a percentage, is the amount of time in a ten-minute period that a welding machine may operate continuously before it shuts down. For example, a machine with a 60% duty cycle at 400 amps may be operated continuously for 6 minutes at 400 amps, before it automatically shuts down to protect its components from overheating damage. After a cooling down period, the machine is ready to operate again.
bank logos
bank logos
© sidirika-nikolaidi.gr    Powered by Softways