TILELUX is a specially designed high quality satin water-based paint for wall tiles. Its composition and the use of the special STEPlus additive makes it unique for painting tile surfaces exposed to a particularly harsh and humid environment. It is characterized by excellent adhesion even on glossy tiles (>6Mpa) and by its excellent resistance to wet environments, to the use of shampoos, shower gels, classic cleaning products, anti-salt products, diluted bleach, white vinegar and hot-cold water alternation. It is a unique solution for bathroom and shower renovation.

Characteristics-Properties

• Easy application
• Excellent finish
• No primer needed
• Excellent adhesion
• Excellent resistance to wet environment
• Excellent resistance to cleaners, bath products, hot-cold water alternation

Application Instructions

Add the special STEPlus additive and stir well for about 5 minutes.

Dilution: 10-15% with water

Applicatrion: Apply TILELUX  in two coats with a roller or brush. It is possible to apply a third coat depending on the shade and gloss of the surface.

Consumption: Approximately 12-14m²/l on properly prepared surfaces.

General notes:

• For the maximum possible result, it is recommended to use the mixture of the paint with the special additive STEPlus within 10 days.
• The product is applied in room temperature conditions, from 12°C to 25°C.
• Optimum performance and adhesion of the product is achieved after 15-20 days from application. During this period, avoid direct impact, abrasion and surface cleaning.
• To clean painted surfaces, use a mild detergent and a soft sponge.
• Wash tools immediately after application with water and detergent (if necessary).