Grout, for tiles, waterproof, atlacoll, atlafill porcelano.
It offers excellent durability without changing its color, does not crack, with great elasticity.
It does not catch bacteria due to its special composition, it is glassy with a pre-oil texture, it is easy to clean
It can cover from 1-8mm and the consumption is from 0.2-2kg/m² depending on the joint width.

Mix preparation - dilution:
Add 5 kg of Atlafill porcelano grout to 1.25-1.75 kg of clean water while stirring.
Continue stirring with an electric drill at low speed until a homogeneous, pasty mixture is created.
Let the mixture set for approximately 10 minutes and stir again.
The ready paste can be used within three hours, under normal ambient conditions.
Application:
Atlafill porcelano grout is applied to joints up to 8mm, on walls or floors, indoors or outdoors.
It is applied with a rubber spatula that is directed diagonally to the joints so that the paste is compressed into the joint and fills it without gaps or unevenness.
In exceptional cases, for demanding applications, it is recommended to mix Atlafill porcelano with the special improving acrylic emulsion Atlaplus classic, in a ratio of 2 parts water to 1 part emulsion by volume.
Avoid applying the product when the temperature of the application area is less than 5°C or greater than 38°C.
If you apply the grout at high temperatures and intense sunlight outdoors, "cool it" with a damp sponge to prevent its violent surface drying that causes cracking.