1.Size:350X250X250mm
2.Color:Beige
3.Power:Use 4x AA 1.5V Battery(not included)
4.Working current:320mA

Open the safe box:
1.First,enter the password which has been set(original password is 1.5.9),then enter "B",green light light up,please rotate the knob rightwards in 5s,pull outwards can open the safe box.
2.Everytime you enter once,the yellow light will flash once and with a "di" sound,means the password chip is confirmed.If the yellow light flashes continuously and with a "didi" sound that means the password you enter is wrong,if you entered the wrong password three times,the password chip doesn't accept any input in 20s.And if enter three more times wrong password,the password chip doesn't accept any input in 5 mins.

Close the safe box:
Rotate the knob leftwards can close the box.

User password setting and change:
1.Under the open status,press the red button of inner side of the door,yellow light light up,please enter user password in 30s(3-8 numbers),then enter"B",and enter the pass word you set again,"Press B"."A"button function is the same as "B" button.
2.If yellow light flashes continuously and with continuous"didi" sound,it means the password you set is wrong.If need the change password,please repeat the operation steps below again.

NOTE:If the voltage of battery is low,please open the safe box and replace new battery.