Security adhesive for woodchip wallpapers, glassfibre, renovation and reinforcement fabrics as well as heavy wallcoverings. Ideal for wallcoverings that can be overpainted. Perfectly suitable for secure bonding on difficult new plaster areas as well as on old plaster and plasterboards.

• high solid content for optimal adhesion and secure bonding of edges
• excellent moisture resistance when recoating
• for application directly onto the wall, with pasting machines and by brush
• lime- and cementproof

Instructions for use: Glutolin K10 is suitable for hanging non
woven wallpapers, fibreglass
wallpapers as well as renovation fleece.

Technical specification: Components: methylcellulose,
starch ether, synthetic resin powder
Density: approx. 0,45 g/cm3
pH-value: approx. 8
Usage: approx. 200 g/m2

Surface preparation: The surface to which the wallpaper is to be applied
must by dry, stable and free of dust, grease etc. Remove old, peeling wallpaper and paint using
decotric Wallpaper Remover. Tidy up cracks, holes and uneven areas with Glutofill WF filler or
Glutofill WG Super Bonding Filler. Pre-treat strongly absorbent, abrasive and chalky surfaces with
Glutogrund LF Deeply Penetrating Primer.
For very translucent wallpaper and contrasting backgrounds, we recommend applying a coat of
Glutogrund TP Wallpaper Primer beforehand. To make subsequent removal easier, it is recommended,
for washable wallpapers in particular, that the surface to which the wallpaper is to be applied be
treated with wallpaper sizing.

Application: Stirring vigorously, sprinkle Glutolin K10
into clean, cold water (see table) and continue to stir for a few minutes. Leave for approx 15
minutes and then stir vigorously again. Apply the adhesive using a wallpaper machine directly onto
the wallcovering or using a short-haired lambskin role in the width of the strips onto the surface.
Hang the wallcovering into the damp bed of adhesive und press it down evenly with a moos rubber
role or a paperhanger spatula. Moisten cladded wallcoverings on the back with a wet sponge before
hanging.

Hang the wallpaper according to the manufacturer’s instructions.

Clean tools with water immediately after use.
Do not use if the object and/or room temperature are below + 5° Celsius! Remove adhesive residues
using a damp cloth
Mixing ratio:
Way of application Mixing ratio
Quantity of water
per 200 g packet
Coverage of
a 200 g packet

Prepasting 1:20 4 l approx. 30-35 m2
Woodchip wallpaper 1:11 2.2 l Approx. 12 m²
All heavy wallcoverings 1:8-1:10 1.6-2 l approx. 8-10 m2