• plastic thread - length 39 mm
• integrated filter for retaining foreign objects
• tolerant of pressure changes in the water main
• smooth closing - no water shocks
• wide range of height adjustment

• Acoustic group II <30 db="" br="">Working range 0.05 to 0.8 MPa
  Recommended Operating Pressure 0.5 – 0.8 MPa
  Height adjustment range 265 – 345 mm
  Thread diameter 3/8"

The valve should be installed in a horizontal position, with the outlet pipe in a perpendicular position, attached to the cistern wall. The water level in the cistern is adjusted by the height of
the float, aided by a regulating threading. Insert the plastic Filter into the inlet part, to catch any dirt and water impurities. The assembly thread of valve G1/2"(G3/8") is adjusted for connecting to common water pipes.
NOTICE FOR USERS: After you have installed the valve, you may notice a small vibration. Do not be alarmed, this is normal and will disappear gradually once the air is bled through the valve. Poor performance of the valve can occur due
to clogging of the Filter, in which case you should remove and clean it. This is why we do not recommend, especially in domestic plumbing, water with small impurities. Calcium stones from blocked parts can easily be removed by
soaking the Filter in a 5% Common Vinegar solution for 1÷1,5 hours. Regular maintenance is recommended to ensure the valve remains in good working order,as shown in the drawings. Only original manufacturers parts should be
used during repair or maintenance, and these are available from your local retailer. In the event of any problems, please contact a qualified professional. Special attention should be given to the quality of water in the public water supply.
In the case of dirt and silt in the water supply then it may cause clogging and damage to the valve. In this case, the damage or breakdown is not the responsibility of the manufacturer and the warranty will not cover these cases.